Training Programmable Logic Controller

Training Programmable Logic Controller

 

PROGRAMMABLE LOGIC CONTROLLER

 

Training Programmable Logic Controller – PLC Training is designed to instruct electrical control professionals on how to successfully integrate a PLC into actual day-to-day industial electrical processes. It not only deals with the hardware and software, but all the surrounding systems that must be compatible to achieve a safe and reliable control system.

The Forum is generic in nature and applies to all types and manufacturers.

PLC Training is also designed to help delegates keep abreast of the latest PLC technologies and techniques available in this area, this tutorial offers an excellent opportunity for delegates to ask specific questions and exchange ideas relating to their own applications.

 

Materi Pelatihan Programmable Logic Controller :

Introduction

This section will begin with a discussion of basic theory of operation and how it is used to control a process. It will also identify potential applications and relate how PLC control compares with traditional methods of control. A discussion of the benefits of PLC control will follow.

 

Hardware Configuration

This section will describe the various components used in the formulation of a PLC control system. Included will be methods to select the correct features and capabilities to match the process requirements.

 

  • CPU sizes and types
  • Backplanes
  • Power supplies
  • I/O module types

 

Installation and Wiring Considerations

There are necessary steps that must be taken to ensure that the control system will be correctly installed to provide safe and reliable operation. Installation recommendations and techniques will be given for the following:

 

  • Power and grounding
  • Enclosures
  • Input devices and wiring methods
  • Output devices and wiring methods

 

Commissioning

This section will discuss the methods used and preparations that should be made to guarantee a smooth and troublefree system start-up.

 

Safety Issues and Techniques

This section will define the major safety issues relating to control systems. A number of techniques will be discussed to address these issues including:

 

  • Solid state switching
  • E-Stops
  • Power-up delays
  • Equipment re-starting
  • Watchdog circuits
  • MCR circuits

 

PLC Numbering Systems

PLC control system hardware and software use alternate numbering systems. The delegate will be exposed to the different base systems and how to convert to and from the decimal format.

 

Programming I

The delegates will be instructed in the commands and logic necessary to assemble a basic PLC program to control an industrial process. The delegate will perform a simple programming exercise.

Interactive Discussion

This will be an opportunity for delegates to interact and trade relevant stories and experiences.

 

Programming Software

Various types of programming software will be introduced to the delegates. Techniques for simple program development and downloading will be demonstrated. Topics will include:

 

  • Program functions
  • Program keying and development
  • Connecting to the PLC
  • Set-up
  • Program downloading
  • Monitoring and diagnostics

 

Hardware will be available so that the delegate can get some hands on experience programming and downloading.

 

Structured Programming

The concept of structured and block programming will be explained. Methods and techniques will be described which can be used to organize and standardize PLC programs so that they can be easily understood.

 

Programmable Logic Controller Programming II

The delegates will be instructed in the commands and logic necessary to assemble an intermediate level PLC program to control an industrial process. The delegates will perform a more challenging programming exercise.

 

Documentation Strategies

The various types of documentation required for effective installation, maintenance, and troubleshooting will be reviewed.

 

Programmable Logic Controller Troubleshooting

Troubleshooting a Programmable Logic Controller-based control system has its challenges and advantages. The necessary tools and techniques required to perform this will be covered. The use of programming software to monitor and diagnose process and hardware problems will be demonstrated.

 

Operator Interfaces

The various types of operator interfaces and how they can be used to enhance the control and diagnostic abilities of the Programmable Logic Controller will be discussed.

 

Data Acquisition

Methods of collecting and storing process data using the PLC and peripheral computer stations will be described. Advanced data representation, graphics, and calculations using the computer to enhance the adaptive control capability of the Programmable Logic Controller based system will also be covered.

 

Programmable Logic Controller vs. PC Control

Two control philosophies are emerging as the favoured choices for industrial control systems. Programmable Logic Controller and PC based systems each have their relative merits and disadvantages. These will be highlighted and examples given where each is the preferred choice.

 

 

Fasilitas Training Yang Diperoleh :

  • Lokasi Training di Hotel Bintang 3-5
  • Ruang Pelatihan Full AC, Toilet dan Musholla
  • Perlengkapan Visual LCD Proyektor, & Whiteboard
  • Akses Internet Wireless
  • Smoking Area.
  • Modul Materi (Hard Copy & Soft Copy)
  • Flashdisk
  • Training Kit (Co-Card, Bolpoin, & Buku Catatan)
  • Sertifikat Keikutsertaan Training
  • Merchandise menarik dari Duta Pro Training & Consulting
  • Konsultasi dengan Instruktur setelah Pelatihan
  • 1x Makan Siang dan 2x Coffee Break (Jam 10:00 & 14:00)
  • Penjemputan Bandara – Hotel

Lokasi Training di Jakarta :

Lokasi Training di Kota Lainnya :

  • Yogyakarta : Hotel Dafam Malioboro, Ibis Style Malioboro, Forriz Hotel, Neo Malioboro
  • Bandung : Ibis Pasteur Hotel, Gino Feruci Hotel, Verona Palace Hotel
  • Surabaya : Hotel Ibis Merah, Yello Hotel Jemursari, Neo Gubeng Hotel, Bidakara Hotel
  • Malang : favehotel Tlogomas Malang, Maxone Hotels at Malang, Hotel Tugu Malang
  • Semarang : Hotel Dafam Semarang, Whiz Hotel Semarang, Aston Semarang Hotel And Convention Center, Hotel Ciputra
  • Solo : favehotel Manahan, Brothers Inn Solo, ASTON Solo Hotel, The Alana Hotel and Convention Center
  • Lombok: Hotel Lombok Garden, Grand Senggigi Hotel, favehotel Langko Mataram

Keterangan :

  1. Jumlah Peserta dapat memperngaruhi biaya training.
  2. Biaya dan Lokasi diatas hanya untuk Private Training dan Public Training, untuk In House Training penawarannya dapat menghubungi kami dilink berikut (kontak kami).
  3. Jumlah peserta, jadwal training dan lokasi training dapat menyesuaikan permintaan.
  4. Pemintaan lokasi yang diluar daftar diatas dapat menghubungi kontak Marketing Kami.

Dapatkan Penawaran Harga Training Terbaik dari Kami!!!

Untuk melihat Jadwal Pelatihan dan Training Online kunjungi Jadwal Training Update dan jika ingin mendaftar pelatihan ini, silakan isi form di Formulir Pendaftaran.

 

Jadwal Pelatihan Duta Pro Training Terbaru Tahun Ini

 

Jadwal Training SDM & Webinar (Online) Terbaru di Jakarta, Bogor, Bekasi, Tangerang, Depok. Lihat Jadwal Fix Running dan Dapatkan penawaran harga murah & diskon dari Kami. Jadwal Training Business Development and Marketing Strategy Bulan Januari, Februari, Maret, April, Mei, Juni, Juli, Agustus, September, Oktober, November, Desember Fix Running.

 

Jadwal Training 2024 di Jakarta

"10-11 Januari  2024 | 17-18 Januari  2024 | 7-8 Februari 2024 | 21-22 Februari  2024 | 6-7 Maret 2024 | 20-21 Maret 2024 | 3-4 April 2024 | 24-25 April 2024 | 14-15 Mei 2024 | 28-29 Mei 2024 | 12-13 Juni 2024 | 20-21Juni 2024 | 10-11 Juli 2024 | 17-18 Juli 2024 | 7-8 Agustus 2024 | 21-22 Agustus 2024 | 11-12 September 2024 | 18-19 September 2024 | 2-3 Oktober 2024 | 16-17 Oktober 2024 | 6-7  November 2024 | 20-21 November 2024 | 11-12 Desember 2024 | 18-19 Desember 2024   "

Bagikan

Tinggalkan Balasan

Alamat email Anda tidak akan dipublikasikan. Ruas yang wajib ditandai *